7. Adjustment Settings for Operators
No.
0715
Gate Fold Position 1
0716
Gate Fold Position 2
0717
Gate Fold Position 3
Finishing: Perfect Binder
For details about the following items, see page 337 "Finishing: Perfect Binder".
No.
0801
Perf Bind Cvr Sht Posit:
Across Feed
0802
Perf Bind Cvr Sht Posit:
With Feed
0803
Perfect Binding Finishing
Angle
0804
Applying Binding Glue
Finishing: Stacker
For details about the following items, see page 339 "Finishing: Stacker".
No.
0901
Ppr Align in Stack Tray: Acr
Feed 1
0902
Ppr Align in Stack Tray: Acr
Feed 2
0903
Paper Alignment in Stacker
Tray: With Feed
0904
Ppr Align in 2nd Stack
Tray: Acr Feed 1
282
Item
Adjust the fold position of the bottom segment 1 of
gatefold sheets when using the fold unit.
Adjust the fold position of the bottom segment 2 of
gatefold sheets when using the fold unit.
Adjust the fold position of the bottom segment 3 of
gatefold sheets when using the fold unit.
Item
Adjust the vertical alignment of the cover sheet position
when performing perfect binding.
Adjust the horizontal alignment of the cover sheet
position when performing perfect binding.
Square the top, bottom, and outside edges when
trimming a deck of paper.
Adjust the amount of binding glue for perfect binding.
Item
Adjust the alignment width in Main Jogger
output sheets are stacked on the stacker.
Adjust the alignment width in Sub Jogger
sheets are stacked on the stacker.
Adjust the alignment position of the Tip Stopper when
output sheets are ejected on the Stacker.
Adjust the alignment width in Main Jogger
output sheets are stacked on the 2nd stacker.
Description
Description
Description
*1
when
*1
when output
*1
when