Ricoh Pro C7200S Operator's Manual page 206

6. Paper Specifications and Adding Paper
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Take out the tab fence from the pocket on the right-hand side of the paper tray.
3. Set the side fences to the size of the tab stock to be loaded, and then load it.
4. Attach the tab fence, and then align the end fence gently against the paper you loaded
while pressing the release button of the end fence.
5. Carefully slide the paper tray fully in.
• Replace the tab fence after use.
204
DWP072
DWP081
DER098