Ricoh Pro C7200S Operator's Manual page 237

• When loading translucent paper, always use long grain paper, and set the paper direction
according to the grain.
• Translucent paper easily absorbs humidity and becomes curled. Remove curl in the translucent
paper before loading. For details about settings for flattening out curled paper, see
page 294 "0304 Correct Output Paper Curl".
• Remove copied or printed sheets one by one.
• When loading coated paper:
• If you want to use glossy paper, select [Coated: Glossy] or [Coated: High Gloss] for [Paper
Type]. If you want to use matted paper (including silk, dull, and satin paper), select [Coated:
Matte] for [Paper Type]. For details about the settings for using coated paper with custom
paper, see page 39 "Registering Custom Paper".
• When loading coated paper or glossy paper, always fan the paper before using it.
• If a paper jam occurs or if the machine makes a strange noise when feeding stacks of coated
paper, feed the coated paper one sheet at a time.
• To load coated paper into the wide LCT, you must specify [Coated: Glossy], [Coated: Matte],
or [Coated: High Gloss] as the paper type and select an appropriate paper weight under
[Paper Weight].
• Depending on the color of the paper, the paper's position may not be detected correctly,
causing the paper to jam.
• When using light-colored paper, specify the paper type as [Color] in [Tray Paper Settings].
• When using black or dark colored paper, or when specifying the paper type as [Color] in
[Tray Paper Settings] does not clear paper jams, specify the paper type as [Black].
• When using carbonless paper, note the following:
• Carbonless paper can be used only when Two-tray Wide LCT is used along with Finisher SR
5050 or Booklet Finisher SR5060 for post-processing.
• When using carbonless paper, you can attach no option except the high capacity stacker
between the machine and Finisher SR5050 or Booklet Finisher SR5060.
• Duplex printing cannot be performed.
• Some types of carbonless paper have expiration dates. Purchase the amount you can use
within the time limit. Contact your paper retailer regarding the expiration dates and storage
methods.
• Depending on the paper weight or direction of the paper, paper jams may occur when reverse
output or duplex printing is performed. If the paper jams when thick long-grain paper is used, either
cancel the reverse output or duplex print settings, or to use short-grain or thin paper.
Envelopes
This section describes loading envelopes.
Recommended Paper
235