Ricoh Pro C7200S Operator's Manual page 445

When there is a problem with a parameter
Message
"86: Error"
When the user lacks privileges to perform an operation
Message
"No response from the
server. Authentication has
failed."
"Printing privileges have
not been set for this
document."
"You do not have a
privilege to use this
function. This job has been
cancelled."
"You do not have a
privilege to use this
function. This job has been
cancelled."
When a user cannot be registered
Message
"Auto-registration of user
information has failed."
Cause
Parameters of the control
code are invalid.
Cause
A timeout occurred while
connection to the server
was being established for
LDAP authentication or
Windows Authentication.
You have no privileges to
print the PDF document
you tried to print.
The entered login user
name or login password is
not correct.
The logged in user is not
allowed to use the selected
function.
Cause
Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed
because the Address Book
is full.
When Messages Appear
Solution
Check the print settings.
Solution
Check the status of the server.
Contact the owner of the document.
Check that the user name and
password are correct.
For details about how to set
permissions, see "Limiting Available
Functions", Security Guide.
Solution
For details about automatic
registration of user information, see
"Auto Registration to the Address
Book", Security Guide.
443