Sizes Detectable With Auto Paper Select - Ricoh Pro C7200S Operator's Manual

6. Paper Specifications and Adding Paper
2. Trailing edge:
• When you use paper other than coated paper: 5.0 ± 1.0 mm (0.20 ± 0.04inches) (Paper Weight
1–Paper Weight 3), 4.0 ± 1.0 mm (0.16 ± 0.04 inches) (Paper Weight 4–Paper Weight 8)
• When you use coated paper: 7.0 ± 1.0 mm (0.28 ± 0.04 inches) (Paper Weight 2), 5.0 ± 1.0mm
(0.20 ± 0.04 inches) (Paper Weight 3), 4.0 ± 1.0 mm (0.16 ± 0.04 inches) (Paper Weight 4–
Paper Weight 8)
3. Left edge: 2.0 ± 1.5 mm (0.08 ± 0.06 inches)
4. Right edge: 2.0 ± 1.5 mm (0.08 ± 0.06 inches)
• The missing image area can be changed. For details, consult the administrator or contact your
service representative. If plain paper that weighs less than 70 g/m
less than 105 g/m
for the leading edge is set to approximately 5 mm. Depending on the paper's condition, the reverse
side's missing image area and its registered values may be different.

Sizes Detectable with Auto Paper Select

The following sizes and orientations of originals are detected automatically:
(mainly Europe and Asia)
Original
location
Exposure
glass
ADF
Original location
Exposure glass
ADF
: Detectable size, ×: Undetectable size
*1 If you want to switch the detectable sizes from these sizes to 8K and 16K, contact your service
representative.
*2 Default is A4. If you want to switch the detectable size from A4 to 8
representative.
*3 If you want to make A5
164
2
is registered as custom paper from the master library, the missing image area
A3 B4 JIS A4
*1 *1
11 × 17
×
*5
size detectable, contact your service representative.
2
B5 JIS
A5
*1, *2 *1
1
8 / × 11
2
*2
×
*6
1
or coated paper that weighs
B6 JIS
A5
*1 *1,*3
× ×
1
8 / × 13
2
*7
*7
/ × 11, contact your service
2
*4