Ricoh Pro C7200S Operator's Manual page 319

Setting Items
A3 SEF
B4 JIS SEF
A4 SEF
B5 JIS SEF
SRA3 SEF
SRA4 SEF
1
13 × 19 / SEF
5
13 × 19 SEF
13 × 18 SEF
3 1
12 / × 19 / SEF
5 5
3 1
12 / × 18 / SEF
5 2
12 × 18 SEF
11 × 17 SEF
1
8 / × 14 SEF
2
1
8 / × 11 SEF
2
Other Paper Sizes
*1 A guide for aligning output sheets when using the stapling function. The guide is located inside the
finisher.
0621 Set Number of Folds for Booklet
Specify the number of booklet folds to be performed when using Booklet Finisher SR5060.
You can adjust the paper folding strength by changing the number of folds per the booklet.
When you select "0", the default value, the finisher folds the booklet according to the number of sheets
in the booklet, as shown below.
• 1–13 sheets: 1 time
• 14–15 sheets: 2 times
• 16–25 sheets: 3 times
The value set here is added to the default values, which are 1, 2, and 3. Set a negative value to reduce
the number of times the finisher folds booklets. Set -1, -2, or -3 to not fold booklets that have 1 to 13
sheets, 14 to 15 sheets, or 16 to 25 sheets, respectively.
Default Max.
Value Value
0.0 0.5 -0.5
Setting Values
Min.
Step
Value
0.1 mm
Unit
317