Ricoh Pro C7200S Operator's Manual page 321

Selecting [Yes] enables correction by striking.
[On: Reverse (Default)] corrects by both striking and reverse rotation of Registration Roller.
Setting Items
Set
0624 Amount of Z-fold Skew Correction
Adjust the striking amount of paper during Z-folding skew correction.
Use this function when Z-folding skew correction causes a side effect.
The default striking amount "0.0" is set to 9 millimeters. Press [ ] to reduce the striking amount. The
amount becomes 0 millimeter when the value is "-9.0".
Setting Items
Set
0625 Amount of Z-fold Skew Correction: Reverse
Adjust the reverse rotation amount of Registration Roller during Z-folding skew correction.
Use this function when Z-folding skew correction causes a side effect.
The default reverse rotation amount "0.0" is set to 3 millimeters. Press [ ] to reduce the reverse rotation
amount. The amount becomes "0" millimeter when the value is "-3.0".
Setting Items
Set
0626 Maximum No. Stacked Sheets in Output Tray
Specify the number of sheets to stack on the Shift Tray at the time of shift sorting.
To avoid paper jams, specify the number according to the paper size.
Values
Off
On
On: Reverse
(Default)
Default Max.
Value Value
0.0 0.0 -9.0
Default Max.
Value Value
0.0 0.0 -3.0
Setting Values
Default Value
On: Reverse (Default)
Min.
Step
Value
0.5 mm
Min.
Step
Value
0.5 mm
Unit
Unit
319