Removal Of Option Exm, External Mixing Parts From Original Front Frame - Keysight Technologies N9030A Installation Note
Pxa signal analyzer. option mtu, multitouch user interface upgrade kit
option mtp, multitouch user interface upgrade kit
with pc6 cpu
Hide thumbs
Also See for N9030A:
- Installation note (8 pages) ,
- Service manual (607 pages) ,
- Installation note (12 pages)
Table of Contents
Advertisement
Removal of Option EXM, External Mixing Parts from Original Front Frame
1. Refer to
Figure
20. Disconnect semi-rigid coax cable W29 from the Ext Mixer connector using a
5/16 inch open-end wrench. W29 will be re-used.
Figure 20
Disconnect W29 from Ext Mixer Connector
Installation Note N9030-90098
Option MTU and MTP, MultiTouch User Interface Upgrade Kits
This procedure applies only to instruments with Option EXM, External Mixing
33
Advertisement
Table of Contents
