Keysight Technologies N9030A Installation Note page 23

Redeeming Entitlement Certificate and Deleting Migrated Licenses
1. Locate the Option Upgrade Entitlement Certificate (5964-5178) from the kit.
2. Redeem the Option Upgrade Entitlement Certificate by following the instructions on the
Certificate.
3. After redeeming your Option Upgrade Entitlement Certificate you will receive two e-mails.
a. The first will list all of the measurement application (along with some, but perhaps not all
other licensed options) to which the analyzer is entitled and will indicate for each item
listed whether or not there is an associated migration product. If a migration product exists,
a license for the associated measurement application will be included in the next e-mail.
For example, if the analyzer is entitled to a N9068A-2FP license, the migration product will
be N9068CL-2FP.
b. The second e-mail will be the traditional license redemption e-mail, which will list the
migration products and will include a license file that contains all of the appropriate
licenses for the analyzer.
4. Before installing the new licenses, you should delete all of the currently-installed licenses for
which migration products exist. This will help to make room for the new licenses (the analyzer
has a 100-license limit). To delete the currently installed licenses for which migration products
exist, proceed as follows:
a. With a keyboard and mouse connected to the USB ports of the analyzer, close the XSA
application.
b. Click on Start, All Programs, Keysight License Manager, Keysight License Manager. This
will launch the Keysight License Manager which will list all currently-installed licenses.
c. Refer to the first e-mail you received. Look for entries indicating a migration product exists,
such as:
"Order 3571234, product N9082BL-1FP, has migration product N9082C-1FP. The license
will be in a following email."
d. Using the mouse and the Ctrl key on the keyboard, select all entries in the Keysight License
Manager (KLM) that contain the model number of the ordered product (in the example
above, this would be N9082B. We can ignore the "L" which might follow the "A" or "B").
NOTE: You will not be able to delete the licenses for N9060A-2FP or N9060B-2FP. This is
OK; these two licenses can exist in addition to the N9060C-2FP license that will be
installed.
e. Right-click and select Delete. Verify that the items selected are correct and, if they are,
press Yes.
f. Repeat steps c through e for all other products listed in the first e-mail that contain
migration products.
5. Locate a USB storage device. Perform a virus scan on this device before use.
6. Save the License File that was attached to the second e-mail to the root directory of the USB
Storage Device.
Installation Note N9030-90098
Option MTU and MTP, MultiTouch User Interface Upgrade Kits
23