Option MTU and MTP, MultiTouch User Interface Upgrade Kits
3. Refer to
Figure
3. Remove the 4 machine screws (1) from the disk drive carrier assembly that
secure the drive (2).
Figure 3
Disk Drive Screws
4. Remove the disk drive (2) from the carrier assembly.
5. Place the new disk drive included in the kit onto the carrier assembly and attach with the four
machine screws (1). Torque to 9 in-lbs.
6. Refer to
Figure
2. Replace the disk drive carrier assembly (2) into the instrument and tighten
the screw to 9 in-lbs.
12
Installation Note N9030-90098