Keysight Technologies N9030A Installation Note page 44
Pxa signal analyzer. option mtu, multitouch user interface upgrade kit
option mtp, multitouch user interface upgrade kit
with pc6 cpu
Hide thumbs
Also See for N9030A:
- Installation note (8 pages) ,
- Service manual (607 pages) ,
- Installation note (12 pages)
Table of Contents
Advertisement
Option MTU and MTP, MultiTouch User Interface Upgrade Kits
13.Refer to
Figure
31. Cut the Vibration Mount
with scissors or a knife to fit the Core Bracket, Top (2)
Bottom (4) N9020-00072.
Figure 31
Vibration Mount Installation
14.Position the Core Bracket, Bottom with the vibration mount facing upward into the opening of
the display shield.
15.Position the ferrite core that is on the ribbon cable over the Core Bracket, Bottom.
16.Position the Core Bracket, Top over the ferrite core. Secure with three 0515-0372 screws (5)
included in the kit. Torque to 9 in-lbs.
44
0460-2725
(3) supplied in the kit into four pieces
N9020-00071
Installation Note N9030-90098
and the Core Bracket,
Advertisement
Table of Contents
