Front Frame Assembly Removal - Keysight Technologies EXA N9010B Installation Notes

Option EXM, External Mixing Upgrade Kit

Front Frame Assembly Removal

1. Refer to Figure 5, "Front Frame
(0515-1035), four on each side, to detach the Front Frame Assembly from the chassis.
2. Refer to Figure 6, "Front Panel
chassis. Remove the ribbon cable W1 from the motherboard. The cable has locking tabs on
each side, pinch and pull to release.
Figure 5 Front Frame Removal
12
Make sure any connectors on the front panel are removed.
Removal,". Using the T-10 driver, remove the eight screws (1)
Cable,". Pull the Front Frame Assembly carefully away from the
W1 may have locking springs on each side. Depress the spring on each side of the connector to
remove from the motherboard.
Installation Note N9010-90067