C
ONFIGURING THE
CLI – Specify the hostname, location and contact information.
Console(config)#hostname R&D 5
Console(config)#snmp-server location WC 9
Console(config)#snmp-server contact Bill
Console(config)#exit
Console#show system
System description: SMC8748M/SMC8724M
System OID string: 1.3.6.1.4.1.202.20.42
System information
System Up time:
seconds
System Name:
System Location:
System Contact:
MAC address (unit1):
Web server:
Web server port:
Web secure server:
Web secure server port:
Telnet server:
Telnet server port:
Jumbo Frame:
POST result
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device 1 Test ............ PASS
I2C Bus Initialization ....... PASS
Switch Int Loopback Test ..... PASS
Crossbar Int Loopback Test ... PASS
Fan Speed Test ............... PASS
Done All Pass.
Console#
Displaying Switch Hardware/Software Versions
Use the Switch Information page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
Field Attributes
Main Board
•
Serial Number – The serial number of the switch.
•
Number of Ports – Number of built-in ports.
•
Hardware Version – Hardware version of the main board.
3-14
S
WITCH
0 days, 19 hours, 6 minutes, and 1.43
R&D 5
WC 9
Bill
00-30-F1-DF-9C-A0
enabled
80
enabled
443
enable
23
Enabled
4-33
4-150
4-150
4-80