Troubleshooting; Problems Accessing The Management Interface; Table B-1 Troubleshooting Chart - SMC Networks SMC TigerStack 1000 SMC8724M Management Manual

Smc networks gigabit ethernet switch management guide

Hide thumbs Also See for SMC TigerStack 1000 SMC8724M:

Table of Contents

Cannot connect using

Telnet, web browser,

or SNMP software

ROUBLESHOOTING

• Be sure the switch is powered up.

• Check network cabling between the management station

and the switch.

• Check that you have a valid network connection to the

switch and that the port you are using has not been disabled.

• Be sure you have configured the VLAN interface through

which the management station is connected with a valid IP

address, subnet mask and default gateway.

• Be sure the management station has an IP address in the

same subnet as the switch's IP interface to which it is

• If you are trying to connect to the switch via the IP address

for a tagged VLAN group, your management station, and

the ports connecting intermediate switches in the network,

must be configured with the appropriate tag.

• If you cannot connect using Telnet, you may have exceeded

the maximum number of concurrent Telnet/SSH sessions

permitted. Try connecting again at a later time.