Table of Contents
Advertisement
C
L
OMMAND
INE
Address Table Commands
These commands are used to configure the address table for filtering
specified addresses, displaying current entries, clearing the table, or setting
the aging time.
Command
mac-address-table
static
clear
mac-address-table dynamic
show mac-address-table
mac-address-table aging-time Sets the aging time of the address
show mac-address-table
aging-time
mac-address-table static
This command maps a static address to a destination port in a VLAN. Use
the no form to remove an address.
Syntax
mac-address-table static mac-address interface interface
vlan vlan-id [action]
no mac-address-table static mac-address vlan vlan-id
• mac-address - MAC address.
• interface
- ethernet unit/port
- port-channel channel-id (Range: 1-32)
• vlan-id - VLAN ID (Range: 1-4093)
4-206
I
NTERFACE
Table 4-54 Address Table Commands
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-24/48)
Function
Maps a static address to a port in
a VLAN
Removes any learned entries
from the forwarding database
Displays entries in the
bridge-forwarding database
table
Shows the aging time for the
address table
Mode Page
GC
4-206
PE
4-207
PE
4-208
GC
4-209
PE
4-210
Advertisement
Table of Contents
