Figure 3-9 Setting The Startup Code; Figure 3-10 Deleting Files - SMC Networks SMC TigerStack 1000 SMC8724M Management Manual

C
ONFIGURING THE
If you download to a new destination file, go to the File Management, Set
Start-Up menu, mark the operation code file used at startup, and click
Apply. To start the new firmware, reboot the system, via the System/Reset
menu.
To delete a file select System, File Management, Delete. Select the file
name from the given list by checking the tick box and click Apply. Note
that the file currently designated as the startup code cannot be deleted.
3-24
S
WITCH

Figure 3-9 Setting the Startup Code

Figure 3-10 Deleting Files