Creating Vlans - SMC Networks SMC TigerStack 1000 SMC8724M Management Manual

• Status – Shows if this VLAN is enabled or disabled.
- Active: VLAN is operational.
- Suspend: VLAN is suspended; i.e., does not pass packets.
• Ports / Channel groups – Shows the VLAN interface members.
CLI – Current VLAN information can be displayed with the following
command.
Console#show vlan id 1
VLAN ID:
Type:
Name:
Status:
Ports/Port Channels:
Console#

Creating VLANs

Use the VLAN Static List to create or remove VLAN groups. To
propagate information about VLAN groups used on this switch to
external network devices, you must specify a VLAN ID for each of these
groups.
Command Attributes
• Current – Lists all the current VLAN groups created for this system.
Up to 255 VLAN groups can be defined. VLAN 1 is the default
untagged VLAN.
• New – Allows you to specify the name and numeric identifier for a
new VLAN group. (The VLAN name is only used for management on
this system; it is not added to the VLAN tag.)
• VLAN ID – ID of configured VLAN (1-4093, no leading zeroes).
• VLAN Name – Name of the VLAN (1 to 32 characters).
1
Static
DefaultVlan
Active
Eth1/ 1(S) Eth1/ 2(S) Eth1/ 3(S) Eth1/ 4(S) Eth1/ 5(S)
Eth1/ 6(S) Eth1/ 7(S) Eth1/ 8(S) Eth1/11(S) Eth1/12(S)
Eth1/13(S) Eth1/14(S) Eth1/15(S) Eth1/16(S) Eth1/17(S)
Eth1/18(S) Eth1/19(S) Eth1/20(S) Eth1/21(S) Eth1/22(S)
Eth1/23(S) Eth1/24(S) Eth1/25(S) Eth1/26(S) Eth1/27(S)
Eth1/28(S) Eth1/29(S) Eth1/30(S) Eth1/31(S) Eth1/32(S)
Eth1/33(S) Eth1/34(S) Eth1/35(S) Eth1/36(S) Eth1/37(S)
Eth1/38(S) Eth1/39(S) Eth1/40(S) Eth1/41(S) Eth1/42(S)
Eth1/43(S) Eth1/44(S) Eth1/45(S) Eth1/46(S) Eth1/47(S)
Eth1/48(S)
Trunk2(S)
VLAN C
ONFIGURATION
4-246
3-171