Table of Contents
Advertisement
•
SSH Authentication Retries – Specifies the number of
authentication attempts that a client is allowed before authentication
fails and the client has to restart the authentication process.
(Range: 1-5 times; Default: 3)
•
SSH Server-Key Size – Specifies the SSH server key size.
(Range: 512-896 bits; Default: 768)
- The server key is a private key that is never shared outside the switch.
- The host key is shared with the SSH client, and is fixed at 1024 bits.
Web – Click Security, SSH, Settings. Enable SSH and adjust the
authentication parameters as required, then click Apply. Note that you
must first generate the host key pair on the SSH Host-Key Settings page
before you can enable the SSH server.
Figure 3-34 SSH Server Settings
U
A
SER
UTHENTICATION
3-73
Advertisement
Table of Contents
