Table of Contents
Advertisement
show spanning-tree mst configuration
This command shows the multiple spanning tree configuration.
Command Mode
Privileged Exec
Example
Console#show spanning-tree mst configuration
Mstp Configuration Information
--------------------------------------------------------------
Configuration name:XSTP REGION 0
Revision level:0
Instance Vlans
--------------------------------------------------------------
1
Console#
VLAN Commands
A VLAN is a group of ports that can be located anywhere in the network,
but communicate as though they belong to the same physical segment.
This section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic
VLAN registration for the selected interface.
Command Groups
Editing VLAN Groups Sets up VLAN groups, including name, VID and
Configuring VLAN
Interfaces
Displaying VLAN
Information
2
Table 4-56 VLAN Commands
Function
state
Configures VLAN interface parameters,
including ingress and egress tagging mode,
ingress filtering, PVID, and GVRP
Displays VLAN groups, status, port members,
and MAC addresses
VLAN C
OMMANDS
Page
4-236
4-238
4-246
4-235
Advertisement
Table of Contents
