Dot1X Timeout Quiet-Period; Dot1X Timeout Re-Authperiod - SMC Networks SMC TigerStack 1000 SMC8724M Management Manual

Example
Console(config)#interface eth 1/2
Console(config-if)#dot1x re-authentication
Console(config-if)#

dot1x timeout quiet-period

This command sets the time that a switch port waits after the Max Request
Count has been exceeded before attempting to acquire a new client. Use
the no form to reset the default.
Syntax
dot1x timeout quiet-period seconds
no dot1x timeout quiet-period
seconds - The number of seconds. (Range: 1-65535)
Default
60 seconds
Command Mode
Interface Configuration
Example
Console(config)#interface eth 1/2
Console(config-if)#dot1x timeout quiet-period 350
Console(config-if)#

dot1x timeout re-authperiod

This command sets the time period after which a connected client must be
re-authenticated.
Syntax
dot1x timeout re-authperiod seconds
no dot1x timeout re-authperiod
seconds - The number of seconds. (Range: 1-65535)
Default
3600 seconds
A
UTHENTICATION
C
OMMANDS
4-109