Table of Contents
Advertisement
Web – Select SNTP, Configuration. Modify any of the required
parameters, and click Apply.
CLI – This example configures the switch to operate as an SNTP client
and then displays the current time and settings.
Console(config)#sntp client
Console(config)#sntp poll 16
Console(config)#sntp server 10.1.0.19 137.82.140.80 128.250.36.24-70
Console(config)#sntp client
Console(config)#exit
Console#show sntp
Current time:
Poll interval: 16
Current
mode: unicast
SNTP status:
SNTP server 10.1.0.19 137.82.140.80 128.250.36.2
Current server: 137.82.140.80
Console#
Setting the Time Zone
SNTP uses Coordinated Universal Time (or UTC, formerly Greenwich
Mean Time, or GMT) based on the time at the Earth's prime meridian,
zero degrees longitude. To display a time corresponding to your local time,
you must indicate the number of hours and minutes your time zone is east
(before) or west (after) of UTC.
Command Attributes
•
Current Time – Displays the current time.
•
Name – Assigns a name to the time zone. (Range: 1-29 characters)
•
Hours (0-13) – The number of hours before/after UTC.
Figure 3-21 SNTP Configuration
Jan
2 01:45:28 2001
Enabled
B
C
ASIC
ONFIGURATION
4-71
4-72
4-70
3-43
Advertisement
Table of Contents
