Figure 3-16 Remote Logs - SMC Networks SMC TigerStack 1000 SMC8724M Management Manual

Smc networks gigabit ethernet switch management guide

Hide thumbs Also See for SMC TigerStack 1000 SMC8724M:

Table of Contents

ONFIGURING THE

Host IP Address – Specifies a new server IP address to add to the

Host IP List.

Web – Click System, Log, Remote Logs. To add an IP address to the Host

IP List, type the new IP address in the Host IP Address box, and then click

Add. To delete an IP address, click the entry in the Host IP List, and then

click Remove.

CLI – Enter the syslog server host IP address, choose the facility type and

set the logging trap.

Console(config)#logging host 10.1.0.9

Console(config)#logging facility 23

Console(config)#logging trap 4

Console(config)#logging trap

Console(config)#exit

Console#show logging trap

Syslog logging:

REMOTELOG status:

REMOTELOG facility type:

REMOTELOG level type:

REMOTELOG server ip address: 10.1.0.9

REMOTELOG server ip address: 0.0.0.0

Figure 3-16 Remote Logs

Warning conditions