Downloading Configuration Settings From A Server; Figure 3-11 Downloading Configuration Settings For Start-Up; Figure 3-12 Selecting The Startup Configuration Settings - SMC Networks SMC TigerStack 1000 SMC8724M Management Manual

B C
ASIC ONFIGURATION

Downloading Configuration Settings from a Server

You can download the configuration file under a new file name and then
set it as the startup file, or you can specify the current startup
configuration file as the destination file to directly replace it. Note that the
file "Factory_Default_Config.cfg" can be copied to the TFTP server, but
cannot be used as the destination on the switch.
Web – Click System, File Management, Copy Operation. Choose "tftp to
startup-config" or "tftp to file," and enter the IP address of the TFTP
server. Specify the name of the file to download, select a file on the switch
to overwrite or specify a new file name, and then click Apply.

Figure 3-11 Downloading Configuration Settings for Start-Up

If you download to a new file name using "tftp to startup-config" or "tftp
to file," the file is automatically set as the start-up configuration file. To use
the new settings, reboot the system via the System/Reset menu. You can
also select any configuration file as the start-up configuration by using the
Syste/File Management/Set Start-Up page.

Figure 3-12 Selecting the Startup Configuration Settings

3-27