Table of Contents
Advertisement
Web – Click IGMP Snooping, Static Multicast Router Port Configuration.
Specify the interfaces attached to a multicast router, indicate the VLAN
which will forward all the corresponding multicast traffic, and then click
Add. After you have finished adding interfaces to the list, click Apply.
Figure 3-95 Static Multicast Router Port Configuration
CLI – This example configures port 11 as a multicast router port within
VLAN 1.
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11 4-285
Console(config)#exit
Console#show ip igmp snooping mrouter vlan 1
VLAN M'cast Router Port Type
---- ------------------ -------
1
Console#
Displaying Port Members of Multicast Services
You can display the port members associated with a specified VLAN and
multicast service.
Command Attribute
•
VLAN ID – Selects the VLAN for which to display port members.
•
Multicast IP Address – The IP address for a specific multicast
service.
•
Multicast Group Port List – Shows the interfaces that have already
been assigned to the selected VLAN to propagate a specific multicast
service.
Eth 1/11 Static
M
F
ULTICAST
ILTERING
4-286
3-207
Advertisement
Table of Contents
