Table of Contents
Advertisement
Command Mode
Privileged Exec
Example
Console#show map access-list ip
Access-list to COS of Eth 1/24
Access-list ALS1 cos 0
Console#
Related Commands
map access-list ip (4-129)
match access-list ip
This command changes the IEEE 802.1p priority, IP Precedence, or
DSCP Priority of a frame matching the defined ACL rule. (This feature is
commonly referred to as ACL packet marking.) Use the no form to
remove the ACL marker.
Syntax
match access-list ip acl_name
[set priority priority] {set tos tos_value | set dscp dscp_value}
no match access-list ip acl_name
• acl_name – Name of the ACL. (Maximum length: 16 characters)
• priority – Class of Service value in the IEEE 802.1p priority tag.
(Range: 0-7; 7 is the highest priority)
• tos_value – IP Precedence value. (Range: 0-7)
• dscp_value – Differentiated Services Code Point value. (Range: 0-63)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
• You must configure an ACL mask before you can change frame
priorities based on an ACL rule.
A
C
CCESS
ONTROL
L
C
IST
OMMANDS
4-131
Advertisement
Table of Contents
