Table of Contents
Advertisement
logging sendmail level
This command sets the severity threshold used to trigger alert messages.
Syntax
logging sendmail level level
level - One of the system message levels (page 4-58). Messages sent
include the selected level down to level 0. (Range: 0-7; Default: 7)
Default Setting
Level 7
Command Mode
Global Configuration
Command Usage
The specified level indicates an event threshold. All events at this level
or higher will be sent to the configured email recipients. (For example,
using Level 7 will report all events from level 7 to level 0.)
Example
This example will send email alerts for system errors from level 3
through 0.
Console(config)#logging sendmail level 3
Console(config)#
logging sendmail source-email
This command sets the email address used for the "From" field in alert
messages.
Syntax
logging sendmail source-email email-address
email-address - The source email address used in alert messages.
(Range: 1-41 characters)
Default Setting
None
S
M
YSTEM
ANAGEMENT
C
OMMANDS
4-67
Advertisement
Table of Contents
