Configuring 802.1X Global Settings; Figure 3-37 802.1X Configuration - SMC Networks SMC TigerStack 1000 SMC8724M Management Manual

CLI – This example shows the default global settings for 802.1X.
Console#show dot1x
Global 802.1X Parameters
system-auth-control: disabled
802.1X Port Summary
Port Name Status
1/1 disabled
1/2 disabled
. .
.
1/47 disabled
1/48 disabled
802.1X Port Details
802.1X is disabled on port 1/1
. .
. 802.1X is disabled on port 1/48
Console#

Configuring 802.1X Global Settings

The 802.1X protocol includes port authentication. The 802.1X protocol
must be enabled globally for the switch system before port settings are
active.
Command Attributes
• 802.1X System Authentication Control – Sets the global setting for
802.1X. (default: Disabled)
Web – Select Security, 802.1X, Configuration. Enable dot1X globally for
the switch and click Apply.
Operation Mode
Single-Host
Single-Host
Single-Host
Single-Host

Figure 3-37 802.1X Configuration

U A
SER UTHENTICATION
Mode
ForceAuthorized
ForceAuthorized
ForceAuthorized
ForceAuthorized
4-110
Authorized
yes
n/a
n/a
n/a
3-79