Cisco ASA Series Cli Configuration Manual page 885

Chapter 1 Configuring the Identity Firewall
Figure 1-2
AD Server
As shown in
Scenario 1 shows a deployment with multiple Active Directory servers and a single AD Agent installed
on a separate Windows server. Scenario 2 shows a deployment with multiple Active Directory servers
and multiple AD Agents installed on separate Windows servers.
Figure 1-3
AD Server
AD Server
As shown in
the clients—are installed and communicate on the LAN.
Figure 1-4
LAN
Client
Deployment Scenario without Redundancy
Scenario 1
AD Agent
ASA
Figure 1-3, you can deploy the Identity Firewall components to support redundancy.
Deployment Scenario with Redundant Components
Scenario 1
AD Agent
ASA
Figure 1-4, all Identity Firewall components—Active Directory server, the AD Agent, and
LAN -based Deployment
ASA
NetBIOS Probe
WMI
AD Servers
Scenario 2
AD Server ASA
AD Agent
Scenario 2
AD Server AD Agent
AD Server ASA
mkg.example.com
10.1.1.2
AD Agent
Cisco ASA Series CLI Configuration Guide
Information About the Identity Firewall
1-5