Cisco ASA Series Cli Configuration Manual page 1082

Configuration Examples for Modular Policy Framework
hostname(config)# policy-map http_traffic_policy
hostname(config-pmap)# class http_traffic
hostname(config-pmap-c)# inspect http
hostname(config)# service-policy http_traffic_policy global
Applying Inspection and Connection Limits to HTTP Traffic to Specific
Servers
In this example (see
that enters the ASA through the outside interface is classified for HTTP inspection and maximum
connection limits. Connections initiated from Server A to Host A does not match the access list in the
class map, so it is not affected.
Any HTTP connection destined for Server B that enters the ASA through the inside interface is classified
for HTTP inspection. Connections initiated from Server B to Host B does not match the access list in the
class map, so it is not affected.
Figure 1-3
Mapped Address: 209.165.201.2:port
See the following commands for this example:
hostname(config)# object network obj-192.168.1.2
hostname(config-network-object)# host 192.168.1.2
hostname(config-network-object)# nat (inside,outside) static 209.165.201.1
hostname(config)# object network obj-192.168.1.0
hostname(config-network-object)# subnet 192.168.1.0 255.255.255.0
hostname(config-network-object)# nat (inside,outside) dynamic 209.165.201.2
hostname(config)# access-list serverA extended permit tcp any host 209.165.201.1 eq 80
hostname(config)# access-list ServerB extended permit tcp any host 209.165.200.227 eq 80
hostname(config)# class-map http_serverA
hostname(config-cmap)# match access-list serverA
hostname(config)# class-map http_serverB
hostname(config-cmap)# match access-list serverB
hostname(config)# policy-map policy_serverA
hostname(config-pmap)# class http_serverA
hostname(config-pmap-c)# inspect http
hostname(config-pmap-c)# set connection conn-max 100
hostname(config)# policy-map policy_serverB
hostname(config-pmap)# class http_serverB
Cisco ASA Series CLI Configuration Guide
1-20
Figure 1-3), any HTTP connection destined for Server A (TCP traffic on port 80)
HTTP Inspection and Connection Limits to Specific Servers
Server A
Real Address: 192.168.1.2
Mapped Address: 209.165.201.1
Host B
Real Address: 192.168.1.1
Chapter 1 Configuring a Service Policy Using the Modular Policy Framework
Security
appliance
port 80
insp.
inside
insp.
port 80
set conns
Host A
209.165.200.226
outside
Server B
209.165.200.227