Cisco ASA Series Cli Configuration Manual page 893

Chapter 1 Configuring the Identity Firewall
What to Do Next
Configure access rules for the Identity Firewall. See
page
Configuring Identity Options
Perform this procedure to add or edit the Identity Firewall feature; select the Enable check box to enable
the feature. By default, the Identity Firewall feature is disabled.
Prerequisites
Before configuring the identify options for the Identity Firewall, you must you must meet the
prerequisites for the AD Agent and Microsoft Active Directory. See
requirements for the AD Agent and Microsoft Active Directory installation.
To configure the Identity Options for the Identity Firewall, perform the following steps:
1-18.
Task Flow for Configuring the Identity Firewall
Configuring Identity-Based Security Policy,
Prerequisites, page 1-8
Cisco ASA Series CLI Configuration Guide
the
1-13