Cisco ASA Series Cli Configuration Manual page 539

Chapter 1 Configuring Objects
hostname (config-network)# network-object host 10.1.1.9
hostname (config-network)# network-object host 10.1.1.89
hostname (config)# object-group network hr
hostname (config-network)# network-object host 10.1.2.8
hostname (config-network)# network-object host 10.1.2.12
hostname (config)# object-group network finance
hostname (config-network)# network-object host 10.1.4.89
hostname (config-network)# network-object host 10.1.4.100
You then nest all three groups together as follows:
hostname (config)# object-group network admin
hostname (config-network)# group-object eng
hostname (config-network)# group-object hr
hostname (config-network)# group-object finance
Configuring Service Objects and Service Groups
Service objects and groups identify protocols and ports. This section describes how to configure service
objects, service groups, TCP and UDP port service groups, protocol groups, and ICMP groups, and it
includes the following topics:
•
•
•
•
•
Configuring a Service Object
The service object can contain a protocol, ICMP, ICMPv6, TCP or UDP port or port ranges.
Configuring a Service Object, page 1-5
Configuring a Service Group, page 1-6
Configuring a TCP or UDP Port Service Group, page 1-8
Configuring an ICMP Group, page 1-10
Configuring an ICMP Group, page 1-10
Cisco ASA Series CLI Configuration Guide
Configuring Objects
1-5