Cisco ASA Series Cli Configuration Manual page 1104

Configuring Application Layer Protocol Inspection
Table 1-2
Keywords
esmtp [map_name]
ftp [strict [map_name]]
gtp [map_name]
h323 h225 [map_name]
h323 ras [map_name]
http [map_name]
icmp
icmp error
ils
im [map_name]
ip-options [map_name]
ipsec-pass-thru [map_name]
Cisco ASA Series CLI Configuration Guide
1-10
Chapter 1
Protocol Keywords
Getting Started with Application Layer Protocol Inspection
Notes
If you added an ESMTP inspection policy map according to
"Configuring an ESMTP Inspection Policy Map for
Additional Inspection Control" section on page
identify the map name in this command.
Use the strict keyword to increase the security of protected
networks by preventing web browsers from sending
embedded commands in FTP requests. See the
strict Option" section on page 1-11
If you added an FTP inspection policy map according to
"Configuring an FTP Inspection Policy Map for Additional
Inspection Control" section on page
name in this command.
If you added a GTP inspection policy map according to the
"Configuring a GTP Inspection Policy Map for Additional
Inspection Control" section on page
name in this command.
If you added an H323 inspection policy map according to
"Configuring an H.323 Inspection Policy Map for
Additional Inspection Control" section on page
the map name in this command.
If you added an H323 inspection policy map according to
"Configuring an H.323 Inspection Policy Map for
Additional Inspection Control" section on page
the map name in this command.
If you added an HTTP inspection policy map according to
the "Configuring an HTTP Inspection Policy Map for
Additional Inspection Control" section on page
identify the map name in this command.
—
—
—
If you added an Instant Messaging inspection policy map
according to "Configuring an Instant Messaging Inspection
Policy Map for Additional Inspection Control" section on
page 1-21, identify the map name in this command.
If you added an IP Options inspection policy map according
to "Configuring an IP Options Inspection Policy Map for
Additional Inspection Control" section on page
identify the map name in this command.
If you added an IPsec Pass Through inspection policy map
according to "IPsec Pass Through Inspection" section on
page 11-64, identify the map name in this command.
1-33,
"Using the
for more information.
1-12, identify the map
1-4, identify the map
1-6, identify
1-6, identify
1-16,
1-25,