Cisco ASA Series Cli Configuration Manual page 553

Chapter 1 Configuring Objects
hostname(config)# time-range for2006
hostname(config-time-range)# absolute start 8:00 1 january 2006
The following is an example of a weekly periodic time range from 8:00 a.m. to 6:00 p.m on weekdays:
hostname(config)# time-range workinghours
hostname(config-time-range)# periodic weekdays 8:00 to 18:00
Monitoring Objects
To monitor objects and groups, enter the following commands:
Command
show access-list
show running-config object-group
show running-config object-group grp_id
show running-config object-group grp_type
Feature History for Objects
Table 1-2
Table 1-2 Feature History for Object Groups
Feature Name
Object groups
Objects
User Object Groups for Identity Firewall
lists each feature change and the platform release in which it was implemented.
Platform
Releases
7.0(1)
8.3(1)
8.4(2)
Purpose
Displays the access list entries that are expanded
out into individual entries without their object
groupings.
Displays all current object groups.
Displays the current object groups by their group
ID.
Displays the current object groups by their group
type.
Feature Information
Object groups simplify access list creation and
maintenance.
We introduced or modified the following commands:
object-group protocol, object-group network,
object-group service, object-group icmp_type.
Object support was introduced.
We introduced or modified the following commands:
object-network, object-service, object-group network,
object-group service, network object, access-list
extended, access-list webtype, access-list remark.
User object groups for identity firewall were introduced.
We introduced the following commands: object-network
user, user.
Cisco ASA Series CLI Configuration Guide
Monitoring Objects
1-19