Cisco ASA Series Cli Configuration Manual page 1048

Configuring Authorization for Network Access
The acl_name argument is the name that is defined on Cisco Secure ACS (acs_ten_acl in the preceding
example), and number is a unique version ID generated by Cisco Secure ACS.
The downloaded access list on the ASA consists of the following lines:
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit tcp any host 10.0.0.254
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit udp any host 10.0.0.254
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit icmp any host 10.0.0.254
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit tcp any host 10.0.0.253
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit udp any host 10.0.0.253
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit icmp any host 10.0.0.253
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit tcp any host 10.0.0.252
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit udp any host 10.0.0.252
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit icmp any host 10.0.0.252
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit ip any any
Configuring Any RADIUS Server for Downloadable Access Lists
You can configure any RADIUS server that supports Cisco IOS RADIUS VSAs to send user-specific
access lists to the ASA in a Cisco IOS RADIUS cisco-av-pair VSA (vendor 9, attribute 1).
In the cisco-av-pair VSA, configure one or more ACEs that are similar to the access-list extended
command (see command reference), except that you replace the following command prefix:
access-list acl_name extended
with the following text:
ip:inacl#nnn=
The nnn argument is a number in the range from 0 to 999999999 that identifies the order of the command
statement to be configured on the ASA. If this parameter is omitted, the sequence value is 0, and the
order of the ACEs inside the cisco-av-pair RADIUS VSA is used.
The following example is an access list definition as it should be configured for a cisco-av-pair VSA on
a RADIUS server:
ip:inacl#1=permit tcp 10.1.0.0 255.0.0.0 10.0.0.0 255.0.0.0
ip:inacl#99=deny tcp any any
ip:inacl#2=permit udp 10.1.0.0 255.0.0.0 10.0.0.0 255.0.0.0
ip:inacl#100=deny udp any any
ip:inacl#3=permit icmp 10.1.0.0 255.0.0.0 10.0.0.0 255.0.0.0
For information about making unique per user the access lists that are sent in the cisco-av-pair attribute,
see the documentation for your RADIUS server.
On the ASA, the downloaded access list name has the following format:
AAA-user-username
The username argument is the name of the user that is being authenticated.
The downloaded access list on the ASA consists of the following lines. Notice the order based on the
numbers identified on the RADIUS server.
access-list
access-list
access-list
access-list
access-list
Cisco ASA Series CLI Configuration Guide
1-20
AAA-user-bcham34-79AD4A08 permit tcp 10.1.0.0 255.0.0.0 10.0.0.0 255.0.0.0
AAA-user-bcham34-79AD4A08 permit udp 10.1.0.0 255.0.0.0 10.0.0.0 255.0.0.0
AAA-user-bcham34-79AD4A08 permit icmp 10.1.0.0 255.0.0.0 10.0.0.0 255.0.0.0
AAA-user-bcham34-79AD4A08 deny tcp any any
AAA-user-bcham34-79AD4A08 deny udp any any
Chapter 1 Configuring AAA Rules for Network Access