Powering On The Gateway - SMC Networks SMCD3GNV User Manual

Powering on the Gateway

After making your connections, use the following procedure to power on the Gateway:
1. Connect the supplied power cord to the power port on the rear panel of the Gateway (see
Figure 2 on page 15).
2. Connect the other end of the power adapter to a working power outlet. The Gateway
powers on automatically, the POWER LED on the front panel goes ON, and the other front
panel LEDs show the Gateway's status (see Table 1 on page 14).
WARNING: Only use the power cord supplied with the Gateway. Using a different power cord
can damage the Gateway and void the warranty.
Installing the Gateway
SMCD3GNV Wireless Cable Modem Gateway User Manual
23