Connecting To The Bacnet Explorer; Using The Fieldserver Toolbox - SMC Networks FieldServer BACnet Explorer Startup Manual

4

CONNECTING TO THE BACNET EXPLORER

The FieldServer Toolbox Application can be used to discover and connect to the BACnet Explorer on a
local area network. To connect to the BACnet Explorer over the Internet using Toolbox, add the Internet
exposed IP Address of the BACnet Explorer by clicking on the
Internet exposed IP Address in a Web Browser directly.
4.1

Using the FieldServer Toolbox


Install the Toolbox application from the USB drive or get it from our website
http://www.sierramonitor.com/customer-care/resource-center?filters=software-downloads

Use the Toolbox application to find the BACnet Explorer, change the IP Address detail if
required and launch the Web GUI.
+
Page 7 of 24
BACnet Explorer Start-up Guide
button, or alternatively enter the