Connecting To The Ez Gateway; Using The Toolbox Application To Discover And Connect To The Ez Gateway - SMC Networks FieldServer FS-EZX-MOD-BAC Startup Manual

6.3

Connecting to the EZ Gateway

6.3.1 Using the Toolbox application to discover and connect to the EZ Gateway:


Install the Toolbox application from the USB drive or get it from our website
http://www.sierramonitor.com/customer-care/resource-center?filters=software-downloads

Use the Toolbox application to find the EZ Gateway, and launch the Web GUI

Please note: If the connect button is greyed out, the EZ Gateway's IP address must be set to
be on the same network as the PC. See Section 6.3.2
Page 10 of 25
Modbus to BACnet Start-up Guide