Instructions For Use (Qualified Personnel) - Otto Bock 13E200 Instructions For Use Manual

CAUTION
Establishing a connection between the skin and metal com­
ponents of the prosthesis with the use of carbon fibre
Injury due to unexpected product behaviour as a result of interfer­
ence conducted by carbon fibres.
► During fabrication, make sure that no connection is formed
between the skin and metal prosthesis components by carbon
fibres.
NOTICE
Improper care of the housing
Damage to the casing through the use of acetone, white spirit or
similar solvents.
► Only clean the housing with a damp cloth and mild soap (e.g.
453H10=1 Ottobock DermaClean).
NOTICE
Thermal overloading due to external heat supply
Destruction of the product.
► Do not expose the electrode to hot air or other sources of
heat.
4.4 Patient information
CAUTION
General use of electrodes
Skin irritation may occur under the electrodes.
► After removing the prosthetic components, check the skin
beneath them for pressure sores and irritation.
► Observe safety information in the instructions for use.
18