Otto Bock 13E200 Instructions For Use Manual page 21

5 Scope of Delivery and Accessories
Scope of Delivery
• 1 pc. 13E200=50/13E200=60 electrode
• 1 pc. 13E80 adjustment tool
• 1 pc. 647H490 instructions for use (qualified personnel)
Additional scope of delivery for socket fabrication
• 1 pc. 13E191 casting template for inner socket
• 1 pc. 13E192 lamination template
• 2 pc. 507S15 lamination plate with bore
• 1 pc. 13E201 electrode accessories for vacuum-formed inner
sockets
• 2 pc. 503F3 socket screw with Allen head
The following products are also required:
• 757M11=X-Change MyoBoy
• 13E129=* electrode cable
6 Preparation for use
Requirements for using the product
The following points must be observed for using the product:
The ideal electrode position was determined with the 757M11=X-
Change MyoBoy.
Please note the 647G265 instructions for use.
The socket was fabricated according to the specifications in the
646T3=3.2 technical information.
6.1 Connecting the product
1) Shorten the electrode cable as needed.
2) Push the electrode cable with the grey side up into the plug
connection all the way to the stop (see fig. 2).
3) Grease the connector receptacle of the product and the pin
contacts with 633F11 silicone grease.
4) Apply 633F11 silicone grease to the electrode cable receptacle.
21