Download Print this page

Instructions For Use (Qualified Personnel) - Otto Bock 9X50 Instructions For Use Manual

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12
4.2 Structure of the safety instructions
WARNING
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe
the safety instructions. Consequences are presented as follows if more
than one consequence is possible:
>
E.g.: Consequence 1 in the event of failure to observe the hazard
>
E.g.: Consequence 2 in the event of failure to observe the hazard
► This symbol identifies activities/actions that must be observed/carried
out in order to avert the hazard.
4.3 General safety instructions
CAUTION
Non-observance of safety instructions
Personal injury/damage to the product due to using the product in certain
situations.
► Observe the safety instructions and the stated precautions in this
accompanying document.
CAUTION
Use of a damaged product
Injury due to loss of product functionality.
► Before use, perform a visual inspection to check if all parts of the
product are undamaged.
► Replace the product immediately in case of damage.
CAUTION
Independent manipulation of the product
Injury due to product damage or malfunction.
► Manipulations to the product other than the tasks described in these
instructions for use are not permitted.
► Opening and repairing the product or repairing damaged components
is not permitted.
CAUTION
Signs of wear on the product
Injury due to faulty control or malfunction of the product.
14

Advertisement

loading

This manual is also suitable for:

9x51