Reverse Y - Basler DART BCON SERIES User Manual

Features
Using ROIs with Reverse X
You can use the Image ROI and Auto Function ROI features when using the Reverse X feature.
The position of an ROI relative to the sensor remains the same regardless of whether or not the
Reverse X feature is enabled.
As a consequence, different regions of the image will be controlled or displayed depending on
whether or not the Reverse X feature is enabled. See example in
Normal Image
ROI
Fig. 48: Using an ROI with Reverse X Mirror Imaging
11.9.2

Reverse Y

The Reverse Y feature is a vertical mirror image feature. When the Reverse Y feature is enabled,
the lines in a captured image will be swapped top-to-bottom. This means that the top line in the im-
age will be swapped with the bottom line, the next-to-top line will be swapped with the next-to-bot-
tom line, and so on.
If you are using dart model daA1600-60uc or daA2500-14uc, the effective Bayer
color pixel alignment will change from GB to RG if you enable reverse Y.
For more information about color pixel alignments, see Section 11.6 on
Figure 49 shows a normal image on the left and an image captured with reverse Y enabled on the
right.
106
Figure 48.
Mirror Image
ROI
AW00136902000
page 89.
Basler dart BCON