Color Camera Spectral Response - Basler DART BCON SERIES User Manual

Technical Specifications and Requirements
3.3.2

Color Camera Spectral Response

The following graphs show the spectral response for each available color camera model.
The spectral response curves exclude lens characteristics, light source
characteristics, and IR cut filter characteristics.
To obtain best performance from color models of the camera, we recommend
using a dielectric IR cut filter. The filter should transmit in a range from 400 nm to
700 ... 720 nm, and it should cut off from 700 ... 720 nm to 1100 nm.
If you are using a
dart bare board color camera, we recommend installing an IR cut filter or a

lens with an integrated IR cut filter when integrating the camera into the
system.
dart S-mount color camera, we recommend attaching a lens with an

integrated IR cut filter to the camera.
dart CS-mount color camera, a suitable IR cut filter is already built into the

lens adapter. For more information, see Section 4.6 on
Fig. 5: daA1280-54bc Spectral Response (From Sensor Data Sheet)
12
Wavelength (nm)
AW00136902000
page 30.
Blue
Green
Red
Basler dart BCON