Electric Installation - 2N IP Base Installation Manual

2.3 Electric Installation

Static IP Address Setting This subsection describes how to connect the 2N
main unit to the power supply and LAN and how to connect other elements.
Connection of RFID reader modules is contained in section 2.4 Extending Module
Connection .
Caution
The device must be part of the electrical system of the building.
Main Unit Connector Configuration
Description board connectors accessible to users:
Legend
LAN (PoE) LAN (PoE according to 802.3af) connector
X12 Connector The connector for RFID Reader modules
Tamper Output of internal security intercom contact
IN Terminals for input in passive / active mode (-30 V to +30 V DC)
2N TELEKOMUNIKACE a.s., www.2n.cz
OFF = open OR UIN > 1.5 V
ON = closed contact OR UIN < 1.5 V
®
IP Base
32/66