Intercom Control As Viewed By Internal User - 2N IP Base Installation Manual

3.3 Intercom Control as Viewed by Internal
User
Call Answering
You can answer the incoming calls to the
any other calls. You can unlock the door, activate/deactivate a user/profile via your
phone keypad during the call. The calls, however, are time-limited to avoid
unintentional blocking of the
Call time limit (refer to the Intercom Configuration / Services / Phone / Calls
subsection of Configuration Manual). Press # on your phone anytime to extend the call
time. The automatic call termination is signalled with a short beep 10 s before the call
end.
Calling to 2N ® IP Base
®
2N IP Base allows you to answer incoming calls. Set the required parameters in the
Incoming calls group; refer to the Intercom Configuration / Services / Phone / Calls
subsection of Configuration Manual.
Door Opening (Switch Activation) by Code
®
2N IP Base is equipped with a door unlocking switch. Enter the valid code (refer to
the Intercom Configuration / Hardware / Switches subsection of Configuration
Manual) using your phone keypad to activate this switch.
Procedure:
Enter the switch 1 or 2 activating code using your phone keypad and press
for confirmation. Confirmation is unnecessary if the Lock code without
confirmation
Switches / Advanced subsection of Configuration Manual.
A valid code is signalled by the
than as defined in
sound.
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N IP Base
is enabled, refer to the Intercom Configuration / Hardware /
Timeout for Entering Numbers
®
2N IP Base intercom using your phone like
line. Set the maximum call duration in the
sound. An invalid code or interruption longer
is signalled by the
53/66