2N IP Base Installation Manual page 5

Basic Features
®
2N IP Base – is an elegant and reliable intercom equipped with lots of useful
functions. Thanks to SIP support and compatibility with major brands of PBX
manufacturers, it can benefit from using VoIP networks.
door or special purpose intercom for office buildings, residential areas and other
applications.
Wide angle HD camera – allows the tenant to see the calling person on his or her
videophone or PC screen in high resolution.
Quick dial buttons – there are 2 quick dial buttons in total. For each button, up to
three separate phone numbers plus substitute users can be defined, which ensures
that the called user is reached whenever needed. The buttons are backlit with a clear
mechanical response. The nametag surface is scratch resistant.
RFID card reader – the card reader module brings the access control functionality
according to the RFID card or keyfob. With the advanced features, other functions can
be RFID card controlled too.
Electric lock control – as part of the access system, the electrical lock can be
controlled by a code entered on the keypad or the called phone, with the RFID card,
via a PC application, etc. Numerous parameters allow for a wide spectrum of
applications.
®
Robustness – 2N
withstands mechanical or weather conditions with no need to purchase extra
accessories.
Audio quality – using the automatic echo cancelling system, full duplex
communication is available at any time.
The installation of 2N
cable. The intercom can be supplied from a 12 V DC power source, or using a PoE
switch.
Use your PC with any internet browser to configure
®
2N Access Commander
2N TELEKOMUNIKACE a.s., www.2n.cz
IP Base is designed as a vandal resistant intercom, which
®
IP Base – is very easy, all you have to do to attach the network
to configure extensive installations of multiple intercoms.
®
2N IP Base can be used as a
®
2N IP Base or apply the
5/66