2N IP Base Installation Manual page 38

Door entry ip intercom
Hide thumbs Also See for IP Base:
Table of Contents

Advertisement

The following network parameters will be set after restart:
IP address: 192.168.1.100
Network mask: 255.255.255.0
Default gateway: 192.168.1.1
Dynamic IP Address Setting
Follow the instructions below to switch on the
Press and hold the REST button.
Wait until the red and green LEDs on the device come on simultaneously
(approx. 20 s).
Wait until the red LED goes off (approx. 5 s).
Wait until the green LED goes off and the red LED comes on again (another 5 s).
Release the RESET button.
Device Restart
Press the RESET button shortly (< 1 s) to restart the system without changing
configuration.
2N TELEKOMUNIKACE a.s., www.2n.cz
Dynamic IP address
mode (DCHP ON):
38/66

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents