2N IP Base Installation Manual page 42

Module Power Supply
®
All modules 2N IP Base
RFID Card Reader Module 125 kHz
The 125 kHz RFID Card Reader (
elements and is used for reading RFID card Ids in the 125 kHz band.
The following RFID cards can be read:
EM4100, EM4102, HID Proximity
RFID Card Reader 13.56 MHz
The 13.56 MHz RFID Card Reader ( Part No. 9156031) is one of the 2N
intercom elements and is used for reading RFID card Ids in the 13.56 MHz band.
The following RFID cards can be read (only card serial number is read):
ISO/IEC 14443A Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight,
Ultralight C
ISO/IEC 14443B CEPAS, HID iCLASS – CSN only
JIS X 6319 Felica
Security Relay
®
The 2N Security Relay
intercom and the connected electric lock. The
2N IP intercom model with firmware versions 1.15 and higher. It significantly enhances
security of the connected electric lock as it prevents lock opening by forced intercom
tampering.
2N TELEKOMUNIKACE a.s., www.2n.cz
are powered via connector X12.
Part No. 9156030)
(Part No. 9159010) is used for enhancing security between the
is one of the 2N
®
2N Security Relay
®
IP Base intercom
®
IP Base
is designed for any
42/66