Engine Holder / Oil Pan / Driveshaft Housing / Mounts Disassembly - Suzuki DF70A Service Manual

2A-6 Housing and Bracket:
Engine Holder / Oil Pan / Driveshaft Housing /
Mounts Disassembly
1) Remove the power unit. Refer to "Power Unit
Removal and Installation" in Section 1D (Page 1D-
11).
2) Remove the lower unit. Refer to "Lower Unit
Removal and Installation" in Section 3A (Page 3A-5).
3) Remove the screw and bonding wire (1).
4) Remove the four bolts securing the STBD / PORT
lower mount covers, then detach the mount covers
(2).
Z9J0112106004
1
I9J011210011-01
2
I9J011210012-01
5) Unscrew and remove the STBD / PORT lower mount
bolts (3). Account for washers (4), (5), mount spacer
(6), forward damper (7), white side mount (8), lower
mount (9), black side mount (10), damper (11),
washer (12) and nut (13).
7
4 5
3 6
7
6
5
6) Remove the eight bolts securing the driveshaft
housing (14) to the oil pan, then remove the
driveshaft housing.
14
9
11
13
8 10 12
I9J011210013-02
12
11
10
9
8
I9J011210014-01
14
I9J011210015-02
I9J011210016-01