Installation
1) Install O-ring (1) to pressure valve cover (2).
2) Install pressure valve (3) and pressure valve cover
(2) to oil pan and secure with bolts (4).
3
3) Install lower side cover.
Refer to "Lower Side Cover Removal and
Installation" in Section 2A (Page 2A-3).
Water Pressure Valve Related Item Inspection
Inspect the water pressure valve in the following
procedures:
1) Remove the water pressure valve.
Refer to "Water Pressure Valve Removal and
Installation" (Page 1F-4).
2
1
I9J011160013-01
2
4
I9J011160014-01
Z9J0111606004
Power Unit Cooling System:
2) Inspect the water pressure valve.
If salt deposits, corrosion, wear or other damage is
found, clean or replace.
Inspect O-ring. Replace if nicked, cut or torn.
3) Install the water pressure valve.
Refer to "Water Pressure Valve Removal and
Installation" (Page 1F-4).
Water Pump Removal and Installation
Refer to "Water Pump Removal and Installation" in
Section 3A (Page 3A-6).
Water Pump Related Item Inspection
Refer to "Water Pump and Related Items Inspection" in
Section 3A (Page 3A-8).
Water Tube Removal and Installation
Removal
Refer to "Engine Holder / Oil Pan / Driveshaft Housing /
Mounts Disassembly" in Section 2A (Page 2A-6).
Installation
Refer to "Engine Holder / Oil Pan / Driveshaft Housing /
Mounts Assembly" in Section 2A (Page 2A-9).
Water Tube Related Item Inspection
Refer to "Engine Holder / Oil Pan / Driveshaft Housing /
Mounts Related Component Inspection" in Section 2A
(Page 2A-13).
1F-5
I9J011160015-01
Z9J0111606005
Z9J0111606006
Z9J0111606007
Z9J0111606008