Eaton Power Xpert C445 User Manual page 211

Accessing Expansion I/O with the Logic Engine
Once the I/O modules are added and the analog modules
configured, switch to the Logic Engine by selecting the
following icon on the toolbar.
Access the Logic
On the Variables window on the right, open the Variable List,
then the RIOParam list as follows.
Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com
Chapter 9—C445 Logic Engine and Expansion I/O
These variables are for the combo 8 input (X0-X7) / 8 output
(Y0-Y7) digital I/O card added earlier and for the 4 input /
2 output combo analog module added earlier. These
variables are available to the Logic Engine. Refer to the Logic
Engine Function Blocks described earlier in this chapter.
197